FURNITURE
My work is abstract in nature yet functional in design. I enjoy constructing things that have not been seen before; using, at times, some non-traditional mediums. I enjoy making contradictions; trees are very curvy in nature so I enjoy using angles to juxtapose the original curves of mother-nature’s design. To further that contradiction, I like to add man-made elements, such as metal and epoxy, where natural defects may occur. Tables can be a common and sometimes overlooked feature in a home. I see them as a gathering place that warrants just as much attention to its’ physical presence as to the people that may congregate around it.
Alv is a coffee table that measures 48" long x 21.5" wide x 19.75" tall.
Made out of Flame Box Elder, live edge Black Locust, Purpleheart and Reclaimed White Oak barn wood with red and black epoxy with coffee grounds.
Alv is designed around a large circular boiler part that is powder coated clear. There is also a 2" diameter bolt powder coated copper and black that runs through the table top and boiler part front leg.
Alv received a 3rd place award at the Pablo for the Confluence of Art Annual 2024.
This Tuatha de Danaan measures 5' long x 12" wide x 40" tall. It is made out of a piano harp with all the strings intact.
The top is made out of figured and birds’ eye maple with blue, green, red, gold and clear epoxy.
The middle of the table has a curved shelf made out of hard maple.
The bottom has an I-Beam in the back connected to 4 custom square tube steel legs in the front all powder coated with a copper vein color.
This piece weighs approximately 220 pounds.
Tuatha de Dannan received a 3rd place award at the Hopkins Center of the Arts 2025
Currently on display at the Grand Inspired in Stoughton, WI. .
Eclaire is a coffee table made out of one piece of Cherry and one piece of Locust wood. The piece of Cherry is a straight, squared board; while the Locust wood is all natural and unsquared. Natural defects in the wood are filled in with copper, blue and red/pinkish epoxy resin.
One side of the table is supported by a large piece of tube steel powder coated blue, while the other side is supported by 2 pieces of reclaimed barn wood (Hemlock) separated by 3 pieces of small tube steel powder coated black with silver speckles.
The top is further supported diagonally by several triangular supports made out of Locust wood.
Eclaire measures 20.5" wide x 39.5" long x 13.5" tall.
All wood is finished with a spray gloss polyurethane.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Erato is a full length barn beam bench.
Tenons on each end with the original hardwood pegs still in place.
The center of the bench has a large mortise with the original hardwood peg.
The legs are 2 large pieces of industrial steel powder coated with a copper vein color. The angled leg is held in place with a 45 degree groove cut into the beam at a skewed angle and dually supported by 3 steel cables and turnbuckles.
The round leg is inset into the beam and held in with powerlags.
The center of the beam has some blue epoxy to fill in a large natural defect in the timber. The blue epoxy matches the blue turnbuckles underneath the beam.
Erato measures 90 inches long x 12 inches wide x and 18.5 tall.
Erato is finished with many layers of gloss polyurethane for a smooth finish that will not snag your clothes.
Hilda is a side table that measures 18” wide X 9.25” deep X 32” tall.
Made out of reclaimed Hemlock, Maple, Ash, Cherry, White Oak, Red Oak and Elm with Green Epoxy in Reclaimed Barn Wood Legs
Mei-Mer is a live edge sofa/hallway table that measure 26" tall x 21" wide x 45" long.
Made out of Live Edge Elm, Red Oak and Walnut with Mahogany Inlays and White, Blue and Green epoxy; all supported on a Silver Vein Powder Coated Gear.
Not pictured are 2 stainless steel turnbuckles that attach the table to the metal gear that provide diagonal support.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Petty is a Cherry burl side table that measures 20” tall x 15” wide x 21.5” long.
Made out of a Cherry Burl, Reclaimed Barn Wood Oak with White Epoxy, held up with an old door closing mechanism and an oak dowel stained blue.
Di-Air is a Cherry burl side table that measures 20" long x 26.5" tall x 17.75" wide.
The top is held up with pipe and an oak dowel stained blue. The base is reclaimed barn Elm with 2 pieces of Mahogany and black epoxy.
This Tuatha de Danaan measures 5' long x 12" wide x 40" tall. It is made out of a piano harp with all the strings intact.
The top is made out of figured and birds’ eye maple with blue, green, red, gold and clear epoxy.
The middle of the table has a curved shelf made out of hard maple.
The bottom has an I-Beam in the back connected to 4 custom square tube steel legs in the front all powder coated with a copper vein color.
This piece weighs approximately 220 pounds.
Tuatha de Dannan received a 3rd place award at the Hopkins Center of the Arts 2025
Currently on display at the Grand Inspired in Stoughton, WI. .
This cherry and maple side table measures 22.5” wide x 23” deep x 21.5” tall.
Buyer pays for actual shipping that will be calculated after payment. Estimate for shipping in the U.S. does not exceed $40. Pickup and local delivery is also an option. We’ll talk! :)
How to Epoxy Workshop
Pour your own wood epoxy coaster. We’ll provide all the supplies along with plenty of wood choices and fun epoxy colors to choose from. Choose your own wood when you arrive and up to three colors of mica powder to mix into your epoxy. Then we'll guide you through each step from a short lecture on what is epoxy, how to mix and pour, potential problems and tips & tricks.
You will then learn how to prep the coaster mold, pick out your wood and finally mix and pour epoxy! This project takes time to cure and needs after hours finishing so schedule a pickup two weeks after your workshop. When you arrive to pick up, we'll show you how to apply mineral oil to reveal the natural colors of the wood and epoxy color!
Size: 4" x 4" Each
Estimated Time: 1.5 Hours
The fine print: Tickets are per project, not per person. Partners welcome! Refunds not available for workshops. If you are unable to attend after booking, we offer a one-time transfer to a different day. Liability waiver must be signed before beginning any work with tools or epoxy. Children under 18 must be accompanied by an adult.
Chevalier is a Farmall tractor front end sofa table.
The Farmall front end was found in the top of a garage that was being torn down.
The top piece of wood and the bottom beam are from 2 different farms. So the entire piece is from 3 different farms.
The top is supported by 2 pieces of tube steel and 2 steel turnbuckles. The turnbuckles also act as a leveling mechanism as the top board has a twist to it.
The bottom beam has 2 pieces of reclaimed steel that act as feet for additional support.
Chevalier measures 35.25" tall x 35" wide x 13.5" deep.
Eclipse is a coffee table made out of one piece of Locust wood and one piece of Walnut.
Both pieces are natural edge pieces. The Walnut has white epoxy resin in any defects while the Locust wood has white, brown, blue, pink, copper and clear epoxy resin throughout.
The table top is held together by 3 pieces of walnut from underneath.
The legs are an industrial piece of tube steel and saw blade powder coated grey.
Both legs are attached together by a curvy piece of Red Oak.
All wood is finished with a spray gloss polyurethane.
THIS TABLE WAS EXHIBITED IN THE 2020 ANNUAL NATIONAL JURIED EXHIBITION AT THE WAUSAU MUSEUM OF CONTEMPORARY ART AND THE 2021 CONFLUENCE OF ART ANNUAL AT THE PABLO IN EAU CLAIRE, WI.
Eclipse is 17" tall x 36" long x 20" wide
Will be shipped as freight on a wood pallet via UPS or another freight company.
Follow is a pedestal table that measures 32.75" tall x 15" long x 10.5" wide.
Made out of White Oak, Elm, Red Oak, Ash, Maple, Reclaimed Barn Wood and Purpleheart with Clear and Purple Epoxy.
A small piece of rectangular tube steel is attached to the back of Follow for a dual purpose counterweight and shelf.
Follow is set at a 3 Degree angle as to create an interesting look and a bit of tension when you look at it.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Lyza is a coffee table made from 2 hand hewn barn beams that are suspending a piece of box Alder with hardwood dowels dyed blue.
There is a shelf under the top made from Ash which connects the two legs that are steel C-Channel powder coated with a copper vein.
There is a piece of Purpleheart in one of the beams mortises that acts as structure to connect one of the legs.
Lyza measures 30.25” long x 24.25” wide x 14.5” tall.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Mitty is a Barn Beam Hallway Table that measures 31.75" long x 17" deep x 31.5" Tall.
The main support is a reclaimed Hemlock barn beam with 2 original mortices and 1 original hardwood peg. The barn beam measures 8" X 7.5".
The top is a single piece of Flamed Box Elder with red epoxy filling in any defects. There are 2 red epoxy circles that hold together a natural crack in the wood. There are 2 pieces of C-Channel steel under the Box Elder top that support the wood from any future cupping due to seasonal moisture changes. The Box Elder is morticed into the barn beam and is held in place by that mortice and 2 powerlag screws painted blue.
The base is a piece of 8" square industrial steel that is powder coated silver vein.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Reg is a reclaimed barn beam side table that measures 20.75" deep x 10.375" wide x 26.75" tall.
Reg is made out of a reclaimed Hemlock barn beam with an original tenon and hardwood peg still intact. The top is a piece of Flamed Box Elder with red epoxy filling in any natural defects and is morticed into the beam and held in place by the mortice and a powerlag screw painted blue.
The base is a piece of 1" thick steel powder coated silver vein.
Un-Oh is a coffee table made out of over 200 separate pieces of hardwood. Ranging from aromatic cedar, walnut, plywood, purpleheart, wenge, red oak, white oak, hickory, cherry, and leopard wood.
The pieces of wood are sandwiching 2 pieces of blue powder coated steel which make the backbone of the table.
Round pieces of wood and powder coated steel help support the legs.
The top is a piece of 1/4" thick tempered glass with rounded edges.
All wood is finished with a spray gloss polyurethane.
UN-OH RECEIVED A 3RD PLACE AWARD IN THE SCULPTURE CATAGORY AT THE 26TH ARTS NORTH INTERNATIONAL AT THE HOPKINS CENTER FOR THE ARTS.
UN-OH ALSO RECEIVED AN HONERABLE MENTION AT THE EXHIBITOUR 2022 FROM JUIOR ALYSSA MONKS.
The size of Un-Oh is 40" long x 18.5" wide x 24.5" tall
Cesario is a coffee table that measures 17" tall X 37.5" long X 22 wide.
Made out of box elder, red oak, walnut, purple heart, tiger strand bamboo and black locust wood.
The top is one piece of box elder with copper epoxy that is stitched to a piece of live edge black locust with blue epoxy. The stitching consists of 6 pieces of tiger strand bamboo.
Cesario's front leg is a custom gear that is powder coated with a silver vein color and placed inside a piece of purple heart. The back leg is a piece of 4" diameter stainless steel powder coated with the same silver vein color that holds up a piece of live edge walnut with silver epoxy.
The bottom shelf is a single piece of live edge red oak with black epoxy
There are also 3 supports under the top of the table that are 3 pieces of live edge walnut with black epoxy.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Clio is a bench made out of a solid piece of 8/4 Canary Wood with some purple epoxy in the end to fill in a natural defect.
The ends are supported by large industrial pieces of steel powder coated black.
The seat is supported by a reclaimed barn board underneath.
All the wood is finished with a natural oil for a semi gloss look and feel.
A 2" x 2" square piece of steel powder coated silver extends the width of the Canary Wood seat. It is held on with purple PowerLag bolts and pink powder coated steel tubes.
Clio measures 62.25" long, 10" wide, 20" tall
CLIO WON BEST OF SHOW AWARD AT THE PABLO CENTER AT THE CONFLUENCE OF ART ANNUAL 2021 in Eau Claire, WI.
Lumiere is a coffee table that measures 18.75" tall x 40.75" long x 25.5" wide.
Made out of Cherry, Black Locust, Elm, Purpleheart and Green epoxy inlays, all supported by reclaimed metal legs.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Hablog is a Barn Beam Hallway table that measures 36" tall x 36" wide x 12.75" deep. The barn beams were reclaimed from 2 separate barns in North Central Wisconsin. One beam is Hemlock and the other is White Oak.
The top is a piece of box elder with Red epoxy in the defects for color, design and stability. It is dadoed into each of the 2 barn beams on two sides. Powerlag screws and the dado holds the piece of box elder in place.
The base is a piece of 4" X 4" industrial steel powder coated Silver Vein.
Will be shipped as freight on a wood pallet via UPS or another freight company.
These side tables are made with the inspiration of our new rescue cat, MacGyver.
The design are from my classic series of side tables with the added feature of black epoxy in all the defects to reflect Mac’s black fur coloring.
An additional feature of these tables is one of the legs is either defect free or it has purple epoxy. That detail reflects the leg that was amputated from Mac the Cat.
Your table will be made out of Elm and Ash tops, Birds Eye Maple side rails and Reclaimed Elm Barnwood.
Please indicate which table you would like when ordering.
The size of these tables will be approximately 18” Tall x 18” Long x 12” Wide.
THE PROCEEDS OF THESE TABLES WILL PAY FOR THE AMPUTATION OF MAC’S LEFT LEG AND OTHER VETERINARIAN BILLS.
Ascoeur is a coffee table that measures 35.75" long x 13.75" wide x 20.5" tall.
Made out of reclaimed Maple, Ash, Elm and Oak.
The top and bottom are wormy maple with green epoxy filling in the worm holes and defects.
The top board has an opening that is offset and is supported with hardwood dowels.
The middle has an adjustable shelf made out of elm and oak.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Calliope is a very old barn board that was made into a bench. Pinkish/red epoxy channels and reinforcement in cracks help keep this board straight and together.
One leg is a piece of barn board Elm while the other leg is a 10.75" diameter tube steel powder coated grey.
Both legs are diagonally supported by triangular supports with gentle curves that are also made out of reclaimed barn wood.
There is also a piece of steel L-Channel powder coated grey that runs underneath the seat for additional support.
Calliope measures 72.5" long x 24" tall x 10.75" wide
All the wood is finished with Tung oil for a semi gloss look and feel.
Please contact if interested as a crate must be constructed prior to shipping. Pick up is an option as well.
Ouzen is a reclaimed barn beam coffee table that measures 38" long x 19" wide x 20" tall. The natural defects in the beams are filled in with clear epoxy with white glitter.
The 2 beams are held together by 7 different pieces of pipe. (Galvanized, copper, stainless and black pipe)
The bottom shelf is a single piece of live edge walnut that runs through one of the legs of this table.
The legs are a piece of industrial C-Channel and a reclaimed storm sewer grate.
Ouzen is finished off with a piece of tempered glass for a top.
Riko is a reclaimed barn beam side table that measures 20" deep x 10.25" wide x 23.5" tall.
The top is a single piece of red oak with a natural crack that is filled with red epoxy.
The Red Oak piece is dadoed into the barn beam and held in place by a Lacewood wooden dowel underneath the top and 2 powerlag screws from the back. There is also a piece of square tube steel under the Red Oak top that prevents that top from cupping in the future due to seasonal moisture changes.
The base is a piece of 3" X 4" rectangular tube steel powder coated silver vein and is inserted through the base of the barn beam.
V-Darn is a Hallway/Sofa Table that measures 36" tall x 36" long x 15" wide.
Made out of approximately 178 separate pieces of Hard Maple with Green, Purple, White, Gold and Black Epoxy with Coffee Grounds filling in defects in the Maple and Legs.
The legs are made out of 4 separate reclaimed Elm barn beams with epoxy filling in defects, worm holes and drilled out sections.
V-Darn is also countertop height which would make it appropriate as a kitchen island.
Q-Feuille is a coffee table that measures 24.25" tall X 41" long X 14.5" wide.
Made out of reclaimed lumber such as elm, maple, ash and oak.
The top are two pieces of reclaimed maple with black epoxy put in all the defects and worm holes. The bottom are two pieces of reclaimed red oak with black epoxy as well.
The sides are several pieces of various reclaimed hardwoods with blue and green epoxy in certain places.
The adjustable shelf in the middle is a single piece of elm with 2 pieces of maple on each end.
Lastly, there are 2 pieces of ash as support pieces in between the sides and one piece of maple under the top for support.
Will be shipped as freight on a wood pallet via UPS or another freight company.
Wan is a side table that measures 12” long X 8” deep X 22” tall.
Made out of Basswood, Maple, Red Oak and Elm Wood with Black and Turquoise Epoxy
Past Furniture
